|
|
|

Municipal Services - Building and Codes Department Commercial/Industrial Submittal Requirements
Adopted Code:
- 2003 Edition as Amended
- International Building Code
- International Residential Code
- International Mechanical Code
- International Fuel Gas Code
- International Fire Code
- International Plumbing Code
- International Property
- Maintenance Code
- National Electrical Code 2002 Edition
Design Criteria:
- Wind, 90mph Exposure C @ 3 second gust
- Seismic, Zone 2A
- Snow, 20 PSF
- Roof Classification, Min. Class C Fire Rated
- Flood Plain Info, Base Flood Elevation
Design Submittal:
- Professional Stamp: Each sheet signed and dated throughout.
- Architect/Engineer must certify that plans meet design criteria.
- Two sets of construction plans for review per building.
- 3 Site Plans
- Special Inspections May Be Required For Concrete, Masonry, Soils, etc.
- Complete list of contractors and subcontractors. All contractors and subcontractors shall be licensed with the City of Bonner Springs.
- Rapid Key Entry System (Knox Box) is required on all commercial and industrial occupancies.
- This department will provide a stamped approved set of plans to be kept on job site.
Note: Plans submitted to the Planning Department are not forwarded to the Building Department – A separate submittal is required..
Permit Processing Goals:
The Codes Department will try to meet the following timetable:
- Review Commercial or Industrial Set of Plans within 7-10 days.
- A permit cannot be issued until the Governing Body has approved all Planning documents and Public Improvements for Commercial or Industrial projects.
City of Bonner Springs
205 E. 2nd Street
P.O. Box 38
Bonner Springs, KS 66012
email: cityhall@bonnersprings.org
(913) 422-1020 FAX: (913) 441-1366
Copyright, 2003, Rossini Management Systems, Inc.
|